Emtech-electronics BLU-CIF Bedienungsanleitung

BLU- CIF Interface Board BLU-CIF Cat5e Wiring Instructions IMPORTANT: IF you are using CAT5e wiring termination with

10MSC-C Switches with new BLU-CIF using old template:

2 BLU- CIF RJ-45 CONNECTIONS TOP ROW BLU-CP1 BLU-CC1A BLU-SV2 BLU-IR2 BTTM ROW BLU-CS/SV1 BLU-CC1B BLU

3 BLU-CP BLU-CS/SV1 BLU-SV2 BLU-CC1A BLU-CC1B The legends for identifying and wiring these euro-

4 A remote control can be used for controlling the volume of the various microphone inputs in the cultural hall. When wiring for a remote applicatio

5C-SW1 thru 3 1. +24V 2. SW1 3. SW2 4. Common USING the C-SW INPUTS WITH BLU-IR INFRARED SENSORS The BLU-IR Infrared Sensors

6“+” (pin 3), and the “-“ (pin 2) to the “-“ (pin 4), when output port 5 on the DSP is triggered. This is typically used to switch speaker level sig

7 The 3.5mm connectors on the opposite end of each cable are orange. They match the color of the mating connector on the back of the DSP and are lab

8BLU-IR with new BLU-CIF using old template:

9Old BLU-CC with new BLU-CIF using old template: