Emtech-electronics BLU-CIF2 Bedienungsanleitung PDF herunterladen (Seite 2)

BLU-CIF RJ-45 CONNECTIONS

TOP ROW

BLU-CP1 BLU-CC1A BLU-SV2 BLU-IR2

BTTM ROW

BLU-CS/SV1 BLU-CC1B BLU-IR1 BLU-IR3

TOP ROW

BLU-IR4 BLU-CP2 BLU-SV4 BLU-

CC2A/SV5

BTTM ROW

BLU-IR5 BLU-CS2/SV3 BLU-SV7 BLU-

CC2B/SV6

IMPORTANT: If you use the RJ-45 blocks for connecting the BLU-

CC, BLU-CP, BLU-CS, BLU-IR and BLU-SV(8) modules, then do not

use any of the 3.5mm euro-style connectors for these accessories. If you

are using the BLU-IR Infrared Sensors for combining audio in overflow

areas, then you have a choice to use either the RJ-45 connections in their

blocks or the 3.5mm euro-style connectors. Wiring the BLU-IR Infrared

Sensors into the 3.5mm connectors will be covered later on in this

document.

A legend for the BLU-CIF2 RJ-45 connections has been silkscreened on the

Interface Board next to the corresponding block of connectors.

BLU-CIF2 3.5mm Euro-block Wiring Instructions

The 3.5mm euro-block connectors have been provided for easy installation

of the BSS Audio equipment into older buildings with existing analog

wiring. Connectors for the BLU-CC, BLU-CP, BLU-CS and BLU-SV have

On the left side of the

BLU-CIF2 Interface

Board are two 2 X 4

blocks of RJ-45

connectors for

terminating the BLU

products via Cat5e

wiring. The BLU

products connect in

this order (left to

right), starting with

Block 1:

BLOCK 1

BLOCK 2

BLOCK 1 BLOCK 2

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Emtech-electronics BLU-CIF2 Bedienungsanleitung Seite 2